PWTR2562 Yoke Type Double Row Full Complement Track Roller 25x62x25mm Automation Conveyor Cam Drive Equipment

PWTR2562 is heavy-duty yoke type track roller with double row full complement cylindrical rollers, standard dimension 25×62×25mm. Thickened crowned outer ring bears extreme radial load; central inner rib provides stable axial guidance to offset shaft deflection and track misalignment. Double lip 2RS contact seals lock internal lubricant, inner ring reserved grease hole supports periodic relubrication. Full roller layout maximizes load capacity, ideal for continuous reciprocating cam motion and linear conveyor tracks, widely used in automated production lines, packaging machinery, textile cam drives and heavy linear transport equipment.

Model:

PWTR2562 (equivalent PWTR2562-2RS)

Inner Diameter d:

25mm

Outer Diameter D:

62mm

Inner Ring Width B:

25mm

Outer Ring Width C:

24mm

Min Fillet r:

1mm, r1:0.5mm

Structure:

Yoke type track roller, double row full complement cylindrical roller, central rib axial guide

Seal:

Double sides 2RS rubber contact lip seal

Material:

GCr15 high carbon chromium bearing steel

Basic Dynamic Load Cr:

29.2kN

Basic Static Load C0r:

42.5kN

Grease Limiting Speed:

3800rpm

Net Weight:

Approx 0.45kg

Standard Variant:

PWTR2562-2RS fully sealed version

• Full complement double row roller design without cage, greatly boost radial load capacity for heavy continuous operation
• Extra thick outer ring with crowned surface, uniform pressure distribution, anti-wear under long-time track rolling friction
• Central inner rib realizes reliable outer ring axial positioning, tolerate slight angular misalignment of linear guide track
• Double lip 2RS rubber seals block dust, debris and coolant contamination, reduce frequent grease replenishment cycles
• Inner ring built-in grease fitting hole, convenient on-site relubrication to extend service life for 24h running equipment
• Standard universal metric size fully interchangeable with global aftermarket cam follower replacement parts
• High hardness quenched steel components resist impact load from frequent reciprocating cam movement

• This PWTR2562 full complement track roller is widely matched to:
• Automated assembly line linear guide track rolling support parts
• Packaging machinery reciprocating cam drive and positioning roller assemblies
• Textile weaving machine cam transmission and shuttle sliding track components
• Heavy-duty belt conveyor roller supports, logistics sorting equipment linear motion modules
• All machinery requiring ultra-high radial load capacity and dust-proof long-cycle rolling operation

• 25+ years experience in PWTR series full complement yoke track roller manufacturing
• Exported to 50+ countries worldwide
• Rich OEM bulk order experience for heavy load sealed cam follower track rollers
• Strict outer ring crown surface hardness, seal tightness and rolling fatigue durability inspection before shipment
• Fast professional technical reply within 24 hours
• Stable mass supply for long-term automation equipment and packaging machinery factory cooperation

• GCr15 bearing steel raw material composition & hardness inspection
• Precision grinding for thick crowned outer ring, inner rib and cylindrical rollers
• Standard quenching & tempering heat treatment for uniform surface hardness HRC60–64
• Seal leakage test, heavy radial rolling fatigue test and full dimensional recheck
• Anti-rust oil treatment + independent shockproof plastic box packaging before delivery

Looking for full complement double row sealed heavy-duty PWTR2562 yoke type track roller supplier?

• Fast factory quotation within 24h
• Professional automation cam drive track roller technical parameter support
• Custom open type non-sealed & stainless steel anti-rust solution suggestions
• Competitive bulk wholesale factory price