High Speed and Low Noise Spherical Plain bearing M64*4 Excavato SI80ES 80x182x55mm

E series Rod M64*4 Excavato SI80ES 80x182x55mm , High Speed and Low Noise Spherical Plain bearing

• Descriptions of Spherical Plain Bearing

The Spherical Bearing is a heavy-duty self-aligning sliding bearing. Highly resistant to impact loads, this product is most fitted to the oscillating section under slow, heavy loads.

• Descriptions of Rod End Bearing

A rod end bearing, also known as a heim joint (N. America) or rose joint (U.K. and elsewhere), is a mechanical articulating joint. Such joints are used on the ends of control rods, steering links, tie rods, or anywhere a precision articulating joint is required. A ball swivel with an opening through which a bolt or other attaching hardware may pass is pressed into a circular casing with a threaded shaft attached. The threaded portion may be either male or female.

•  Maintenance Required

1. Rod body with right or left hand female thread

2. It is made up of a radial spherical plain bearing GE..E(s) or GE..ES 2RS and rod body

3. Surface of rod body zine plated, housing of SI..ES with a lubricating hole or grease nipple

4. For left hand thread, please add suffix "L", e.g. SIL 30 ES

5. For bearings d≥15, SI..ES 2RS also available, e.g. SI 25 ES 2RS

6. Lubricating hole or grease nipple isn't available for size marked"*"

• Specification of Rod End Bearing SI 80 ES